How to Set the Controller of the TP-877/877A 3D Mirror Magnet Dance Floor?

Dec 27, 2022 | Product Guides

How to Set the Controller of the TP-877/877A 3D Mirror Magnet Dance Floor?

Our Led dance floors support multiple control modes, including remote control, DMX control and computer control.

Led dance floor size smaller than 14x14ft, just need 1pcs controller.

Led dance floor size bigger than 14x14ft, need 2pcs controllers

Led dance floor size bigger than 30x30ft, need 3pcs controllers

Setting the NO.1 controller:

➭Turn on the switch

DMX Mode does not need to address. It can connect to the controller with cable directly if you use DMX control.

➭Press next, Software version does not need to address.

➭Press next

Device port, press enter

➭Choose 8 port (depending on size) and press enter  

➭Press ESC and press next

Device order and press enter

➭Choose 01(because this is the first controller), press enter

➭Press ESC and press next

Device Type, press enter

➭Choose Floor Mir 64, press enter

➭Press ESC and press next

Work Mode, press enter

➭Choose IR Mode– for controlling with remote control

➭Press ESC and press next

Program set, Program mode does not need to address

Setting the NO.2 controller:

➭Turn on the switch

DMX Mode does not need to address. It can connect to the controller with cable directly.

➭Press next, Software version does not need to address.

➭Press next

Device port, press enter

➭Choose 4 port (depending on size) and press enter  

➭Press ESC and press next

Device order and press enter

➭Choose 02(because this is the second controller), press enter

➭Press ESC and press next

Device Type, press enter

➭Choose Floor Mir 64 

➭Press ESC and press next

Work Mode, press enter

➭Choose Slave Mode(because this is the second controller)

➭Press ESC and press next

Program set, Program mode does not need to address

Setting the NO.3 controller:

➭Turn on the switch

DMX Mode does not need to address. It can connect to the controller with cable directly.

➭Press next, Software version does not need to address.

➭Press next

Device port, press enter

➭Choose 4 port (depending on size) and press enter  

➭Press ESC and press next

Device order and press enter

➭Choose 03(because this is the second controller), press enter

➭Press ESC and press next

Device Type, press enter

➭Choose Floor Mir 64 

➭Press ESC and press next

Work Mode, press enter

➭Choose Slave Mode(because this is the second controller)

➭Press ESC and press next

Program set, Program mode does not need to address

Inquiry Now

    0 Comments

    Submit a Comment

    Your email address will not be published. Required fields are marked *