How to Set the Controller of the TP-M878 Magnet Digital Dance Floor?

Dec 22, 2022 | Product Guides

Led dance floor size smaller than 14x14ft, just need 1pcs controller.

Led dance floor size bigger than 14x14ft, need 2pcs controllers

Led dance floor size is or bigger than 20x20ft, need 3pcs controllers

Led dance floor size is or bigger than 20x20ft, need 3pcs controllers

Led dance floor size is or bigger than 26x26ft, need 4pcs controllers

Led dance floor size is or bigger than 28x28ft, need 5pcs controllers

Setting the NO.1 controller:

  • Turn on the switch
  • DMX Mode does not need to address. It can connect to the controller with cable directly.
  • Press next, Software version does not need to address.
  • Press next
  • Device port, press enter
  • Choose 4 port (bigger than 16×16) and press enter , Choose 8 port ( 16x16ft or smaller than 16x16ft )
  • Press ESC and press next
  • Device order and press enter
  • Choose 01(because this is the first controller), press enter
  • Press ESC and press next
  • Device Type, press enter
  • Choose Floor Mir 64, press enter
  • Press ESC and press next
  • Work Mode, press enter
  • Choose IR Mode– for controlling with remote control
  • Press ESC and press next
  • Program set, Program mode does not need to address

Setting the NO.2 controller:

  • Turn on the switch
  • DMX Mode does not need to address. It can connect to the controller with cable directly.
  • Press next, Software version does not need to address.
  • Press next
  • Device port, press enter
  • Choose 4 port (bigger than 16×16) and press enter
  • Press ESC and press next
  • Device order and press enter
  • Choose 02(because this is the 2nd), press enter
  • Press ESC and press next
  • Device Type, press enter
  • Choose Floor Mir 64 
  • Press ESC and press next
  • Work Mode, press enter
  • Choose Slave Mode(because this is the second controller)
  • Press ESC and press next
  • Program set, Program mode does not need to address

Setting the NO.3 controller:

  • Turn on the switch
  • DMX Mode does not need to address. It can connect to the controller with cable directly.
  • Press next, Software version does not need to address.
  • Press next
  • Device port, press enter
  • Choose 4 port (bigger than 16×16) and press enter, Choose 8 port ( 16x16ft or smaller than 16x16ft )
  • Press ESC and press next
  • Device order and press enter
  • Choose 03(because this is the 3th controller), press enter
  • Press ESC and press next
  • Device Type, press enter
  • Choose Floor Mir 64 
  • Press ESC and press next
  • Work Mode, press enter
  • Choose Slave Mode(because this is the second controller)
  • Press ESC and press next
  • Program set, Program mode does not need to address

Setting the NO.4 controller:

  • Turn on the switch
  • DMX Mode does not need to address. It can connect to the controller with cable directly.
  • Press next, Software version does not need to address.
  • Press next
  • Device port, press enter
  • Choose 4 port (bigger than 16×16) and press enter, Choose 8 port ( 16x16ft or smaller than 16x16ft )
  • Press ESC and press next
  • Device order and press enter
  • Choose 04(because this is the 4th controller), press enter
  • Press ESC and press next
  • Device Type, press enter
  • Choose Floor Mir 64 
  • Press ESC and press next
  • Work Mode, press enter
  • Choose Slave Mode(because this is the second controller)
  • Press ESC and press next
  • Program set, Program mode does not need to address

Inquiry Now

    0 Comments

    Submit a Comment

    Your email address will not be published. Required fields are marked *