How to set up magnet digital led dance floor?
The most common used size for hotel and banquet hall is 20x20FT.
What is all included for 20×20 led dance floor for sale?
1. 144 pieces magnet LED Dance Floor
2. 1 tablet and 1 router
3. 1 remote controller
4. 6 Low Consumption Power Supply
Front View
5. 3 controllers
Front View
6. 6 magnet edges with power cable and signal cable
7. 18 wireless magnetic edge
8. 18 Flight Cases for LED dance floors
9. 1 extra flight case for accessories
But HOW to light up dance floor when you are in the events?
Let’s move on step by step.
This is the complete Installation Drawing for 20x20ft light up floor tiles
First, pick the led dance floor out from the flight case one by one.
Second, Install the first two rows. There is a arrow beside the light up dance floor, make sure that all dance floors are in the same direction. When you hear “CHUCK” from the magnet connector, you set up the dance floor perfectly.
Third, connect the magnetic edge with power cable and controller, make sure that the “IN” side is the starting point where the cables need to be connected. (Silver connector for controller and blue connector for power supply)
Fourth, Connect the cables to the power supply and controller relatively. ( Make sure that the lines on the edge connect ports 1, 2, 3, 4 in order )
Fifth, set up the led dance floor based on the complete drawing, and connect the wireless magnet edges for the other three sides.
Installation Video
Last but not least, fix the controllers and test the effects for these 3D LED dance floor.(DO NOT KEEP BRIGHT WHITE LIGHT FOR MORE THAN 30 MINUTES)
Controller Setting
Please press “ENTER” before set each function, after setting, press “ESC”
Work Mode
1. If you only use the controller to control the LED panels, set the FIRST controller Auto Mode, the SECOND and THIRD controller Slave Mode.
No.1 Controller
Enter
No.2 Controller
Enter
No.3 Controller
Enter
2.If you want to use remote control, enter Work Mode and set IR Mode, and set No.2 and No.3 Controller IR Mode too. (If you use the remote to switch effects, please press the corresponding button for more than 2 seconds)
No.1 Controller
Enter
No.2 Controller
Enter
No.3 Controller
Enter
3. If you want to control the LED dance floors by DMX, set DMX Mode.
No.1 Controller
Enter
No.2 Controller
Enter
No.3 Controller
Enter
Program Set
(Three controllers need to be set the same)
Program
1. If you want to play back all the effects in SD card automatically:
Enter
2. If you want to play only one specific effect, you could choose corresponding program, like program:01, program: 02 , etc.
Enter
Speed
Please adjust the to normal speed: 9
Enter
Program Mode
(Three controllers need to be set the same)
1. If you want to play the pattern effects, set Video Mode;
Enter
2. If you want to play the starlit effects, set Star Mode
Enter
Software Version
(Three controllers need to be set the same)
Device Type
(Three controllers need to be set the same)
You can choose your floor tiles Device Type, there are different versions for different floor tiles: For magnet digital dance floor, make it be Mirror 64.
Choose Device Port:
Enter
We would set for you when we test your LED dance floors.
Device Order
Set the controllers in order:
No.1 Controller
Enter
No.2 Controller
Enter
No.3 Controller
Enter
ORIGINAL TABLET (IPAD CONTROL) for Magnet Digital Dance Floor
Step one: Plug the Router, and connect the Router with controller.
Step two: Connect the Router with Tablet. (Password: 12345678)
Step three: Open the Software (LedSet) on the desktop
Step four: Choose the size for floor
Type: 8x8_4P
Width : 24
Height: 24
Then save and move to Player
Step five: Press “Path” to Upload the effects on the tablet we have set.spacer.gif
Step Six: choose the effects you like for events and add on the list.
Step Seven: If you want to type words on the led dance floor, press “Visual Effect”, type the words you need, and you could also choose the font, color, speed and pattern for the words. Also, please remember to add the words on the list.
You could show the pattern effects and words alone, and also mixed the pattern effects with the words.
Step Eight: Disconnect the router on Tablet if you would like to control the led dance floors with the remote, controller or DMX.
Functions of DMX
| DMX Channels | Function | Data | |||
| CH1 | Sub Dimmer | 0-255(dark-bright) | |||
| CH2 | Strobe | 0-255(slow-fast) | |||
| CH3 | Red Color | 0-255(dark-bright) | |||
| CH4 | Green Color | 0-255(dark-bright) | |||
| CH5 | Blue Color | 0-255(dark-bright) | |||
| CH6 | No Function | 0-15 | |||
| P1:16-31 | P2:32-47 | P3:48-63 | P4:64-79 | P5:80-95 | |
| P6:96-111 | P7:112-127 | P8:128-143 | P9:144-159 | P10:160-175 | |
| P11:176-191 | P12:192-207 | P13:208-223 | P14:224-239 | P15:240-255 | |
| CH7 | No Function | ||||
| P16:16-31 | P17:32-47 | P18:48-63 | P19:64-79 | P20:80-95 | |
| P21:96-111 | P22:112-127 | P23:128-143 | P24:144-159 | P25:160-175 | |
| P26:176-191 | P27:192-207 | P28:208-223 | P29:224-239 | ||
| 1-29 Program loop | 240-255 | ||||
| CH8 | Speed | 0-255 (Slow-fast) | |||
| DMX Channels | Function | Data | |||
| CH.1 | Sub Dimmer | 0-255(dark-bright) | |||
| CH.2 | Strobe | 0-255(slow-fast) | |||
| CH.3 | Red Color | 0-255(dark-bright) | |||
| CH.4 | Green Color | 0-255(dark-bright) | |||
| CH.5 | Blue Color | 0-255(dark-bright) | |||
| CH.6 | Program Group.1(P1-P15) | 0-255 | |||
| CH.7 | Program Group.1(P16-P30) | 0-255 | |||
| CH.8 | Speed | 0-255(slow-fast) | |||